ABS Trouble Codes
 
 
 
 
 
 
These are the trouble codes for the Antilock Braking System only, not the OBD II system. 95-98 Odyssey and Oasis

The diagnostic tool is on the passenger's side lower dashboard, at the bottom of the glove compartment. Just get down on the floor and look up at the bottom of the glove compartment, you'll see a BLUE plug that has two small open slots. Just use a bare-metal paperclip or something similar (like a thin wire) to put in the slots to connect them, then turn the ignition ~ON~ *BUT DO NOT START!

ABS Jump Plug Location

ABS Jump Plug

The ABS light will blink a series of times. The light will start to blink, pause, then begin to blink again...Use a piece of paper and pencil to write the total number of blinks down. Example: 4 fast blinks, a pause, then 8 fast blinks, = code #48

The trouble code will repeat THREE times, and then stop. Remove the paperclip or wire, and then look below to see where your problem is...

Codes for 95-97 Odyssey/Oasis

ONE (1) blink followed by:
2 blinks= Pump Motor
3 blinks= High pressure leak
4 blinks= Pressure switch
8 blinks= High pressure system

TWO (2) blinks followed by:
1 blink= Parking brake

THREE (3) blinks followed by:
1 blink= Pulser, right-front
2 blinks= Pulser, left-front
4 blinks= Pulser, right-rear
8 blinks= Pulser, left-rear
12 blinks= Different tire diameter. If a tire size is different than the others, the ABS will see it as a fault.

FOUR (4) blinks followed by:
1 blink= Wheel sensor, right-front
2 blinks= Wheel sensor, left front
4 blinks= Wheel sensor, right-rear
8 blinks= Wheel sensor, left-rear

FIVE (5) blinks followed by:
4 blinks= Rear wheel lock, right
8 blinks= Rear wheel lock, left

SIX (6) blinks followed by:
1 blink= Fail safe relay, front
4 blinks= Fail safe relay, rear

SEVEN (7) blinks followed by:
1 blink= Solenoid, right-front
2 blinks= Solenoid, left-front
4 blinks= Solenoid, rear

EIGHT (8) blinks followed by:
1 blink= ABS function
2 blinks= CPU comparison
4 blinks= Integrated Circuit (CI)

Codes for 98-99 Odyssey/Oasis

One (1) blink followed by:
1 blink = Right Front Sensor
2 blinks = Right Front Sensor
3 blinks = Left Front Sensor
4 blinks = Left Front Sensor
5 blinks = Right Rear Sensor
6 blinks = Right Rear Sensor
7 blinks = Left Rear Sensor
8 blinks = Left Rear Sensor

Two (2) blinks followed by:
1 blink = Right Front Pulser
2 blinks = Left Front Pulser
3 blinks = Right Rear Pulser
4 blinks = Left Rear Pulser

Three (3) blinks followed by:
1 blink = Front Right Inner Solenoid
2 blinks = Front Right Outer Solenoid
3 blinks = Front Left Inner Solenoid
4 blinks = Front Left Outer Solenoid
5 blinks = Rear Right Inner Solenoid
6 blinks = Rear Right Outer Solenoid
7 blinks = Rear Left Inner Solenoid
8 blinks = Rear Left Outer Solenoid

Four (4) blinks followed by:
1 blink = Wheel Lock on Right Front Sensor
2 blinks = Wheel Lock on Left Front Sensor
3 blinks = Wheel Lock on Right Rear Sensor
4 blinks = Wheel Lock on Left Rear Sensor

Five (5) blinks followed by:
1 blink = Motor Lock
2 blinks = Motor Stuck Off
3 blinks = Motor Stuck On
4 blinks = Fail Safe Relay

Six (6) blinks followed by:
1 blink = Ignition Voltage
2 blinks = Ignition Voltage

Seven (7) blinks followed by:
1 blink = Different Diameter Tire

Eight (8) blinks followed by:
1 blink = Bad ABS Unit
 
For those who may ask;
Left side of the vehicle is the Driver's side.
Right side of the vehicle is the Passenger Side.

- Thanks to hockeyman from odylcub.com for the info on 95-97 Codes.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 



© 2006 mkydesigns